The Internet Connection Wizard is a very powerful tool.
To start the Small Business Server Internet Connection Wizard from Small Business Console

1. Open the To Do List from the Small Business Server Administrator Console and click Internet Connection Wizard.
2. On the Welcome page, click Next.
3. The Configure Hardware page offers four choices:
   • Modem or terminal adapter. Use when you have an analog modem or ISDN terminal adapter.
   • Router. Use when a DSL/ADSL, ISDN, frame relay, or cable router is used to connect to the Internet.
   • Full-time connection/Broadband Modem. Use for a full-time, high-speed connection to the ISP-for example, when using a DSL/ADSL modem or router or a cable modem.
   • Do not change my networking configuration. Use if the server is not functioning as a gateway between the private network and the Internet. Also use to preserve manually configured network settings.

1. Click Start and Run
2. Enter ICW

With the wizard you can be configure how the server connects to the Internet,

• dial-up modem
• router or
• broadband.

Having done that it is possible to leave the wizard and leave the mail settings untouched by click on Do Not Change My Exchange Server Settings. This is useful when the means of connection to the Internet changes.

If the connection settings have already been configured, the wizard can skip the connection dialogs and continue with email settings by selecting Do Not Change Network Configuration.
You can also configure the incoming and outgoing mail for the different connection types

• dial-up modem
• router or
• broadband.